A good news for DIY lovers
Date：March 12, 2020
Are you still using traditional soldering tools such as soldering station, which is bigger havey and ugly?
The composition and characteristics of SQ-001 electric iron
Control terminal:
SQ-001 is based on 304 stainless steel nested ABS + PC housing, integrated dedicated power interface, safety circuit design, anti-static structure, built-in STM32 processor, dual temperature sensor and accelerometer, which makes SQ-001 realize Intelligent temperature control between 100–400 degrees, instant heating, automatic sleep, over-temperature alarm and other functions.
Heating end:
The integrated inner heating type heating core makes the heat energy conversion rate more efficient and rapid.
External independent power supply:
DC5525 power interface, suitable for DC12 -24V notebook power supply, car power supply and mobile power supply.
Micro USB interface:
You can set the heating curve through the parameter file, customize the startup logo.
Difference between SQ-001 electric soldering iron, soldering station and other electric soldering iron on the market:
SQ-001 Mini Soldering Iron is a built-in intelligent NC soldering iron, lightweight design, easy to install and use, easy to remove and store, easy to carry, comfortable control handle, high-efficiency heating end, simple control interface, intelligent temperature control , Instantaneous heating, automatic sleep, over-temperature alarm and other functions.
Soldering station is larger in size, which is inconvenient for disassembly and storage.
Other electric soldering iron on the market is small and easy to carry, but has the same problems as the soldering station:
1. Long temperature rise time;
2. No sleep function, resulting in short life of the electric soldering iron;
3. The thermal energy loss during the thermal energy conversion process of the soldering iron head is serious, and the screen display temperature is always higher than the actual temperature;
4. Soldering stations and electric soldering irons on the market require a fixed power supply (220V AC), and their use scenarios are limited.
SQ-001 electric soldering iron is suitable for DC12–24V laptop power supply, car power supply and mobile power supply.
XT60, T-plug, XT30 to DC5525 power cords are perfectly combined with aeromodelling batteries: support 3S-6S
Under the temperature control state, SQ-001 is left standing for 180 seconds (the factory preset is 3 minutes, adjustable from 1–10 minutes), it will enter the sleep state, and the temperature will return to the preset sleep temperature of 200 ° C;
When SQ-001 moves, it will automatically enter the temperature control state; the temperature will return to the current set temperature (the factory preset temperature is 300 ℃)
In the sleep state, it will enter the standby state after a preset standby time. The standby time (the factory preset is 6 minutes), and the time can be customized.
Hibernation mode and standby mode can effectively prevent the soldering iron from wearing out after being used for a long time without power, thus increasing the service life of the soldering iron, and also preventing the safety hazard caused by forgetting to power off the soldering iron after use.
The SQ-001 electric soldering iron uses an integrated soldering iron head with a high thermal energy transfer rate, and the screen display temperature is basically the same as the actual temperature;
The soldering station and the electric iron on the market use a three-piece soldering iron head, which has a low thermal energy conversion rate and serious thermal energy loss, which causes the screen display temperature to always be higher than the actual temperature;
Summary of the advantages of SQ-001 electric soldering iron:
- Small and exquisite, easy to disassemble and store, easy to carry;
- The temperature rises fast;
-
3. Heating / Cooling switch at will;
4. Automatic hibernation and automatic standby effectively prevent the soldering iron from wearing out after being used for a long time without power, thereby increasing the life of the soldering iron, and also preventing the safety hazard caused by forgetting to power off after using the soldering iron;
5. over temperature alarm;
6. Customize the exclusive logo on startup;
7. You can customize parameters such as startup temperature, sleep time and standby time;
8. Integrated internal heating type heating core, making the heat energy conversion rate more efficient and quick;
9. The real-time temperature of the OLED display is more clearly at heart;
10. Suitable for DC12–24V laptop power supply, car power supply and mobile power supply. The usage scenarios are not limited by power supply. Add XT60, T-plug, XT30 to DC5525 power cord and aircraft model battery perfectly: support 3S-6S.
Dear Customer/DIYer
Thank you very much for your support and hope you have a happy and interesting shopping experience. We are very welcome to the majority of customers and friends to participate in our DIY interesting articles sharing activities.
Share & Cash Back
The number of words is more than 300 words, have exquisite picture in the article. Send us your article. After check your article and it pass through, we will cashback the amount of 5-8 dollars according to the quality of the articles.
Welcome to contact this email (info@sequremall.com) and send us the articles for checking.
