-
SQ-SW3 Spot Welder Firmware Update
Firmware update steps: When the machine is turned off and the charging power is unplugged, first press and hold the "" key, then use the Type-C cable to connect the spot welder and the computer. At this time, the spot welder screen displays "UPDATE". Copy the firmware to the virtual disk of the computer. If the upgrade is successful, "READY" on the screen will... -
HT140 Firmware Upgrade
Firmware update steps: The user holds down the "A" button and does not let go. After connecting the PC and HT140 using USB, the "UPDATE" interface appears on the soldering iron screen. Paste the downloaded firmware in the computer disk, and the "READY" in the soldering iron screen changes to "YES", the firmware is successfully upgraded, and the connection is disconnected. HT140_V1.04_Firmware_release_update_description:... -
S99 Firmware Upgrade
Firmware update steps: The user holds down the "A" button and does not let go. After connecting the PC and soldering iron using USB, the "UPDATE" interface appears on the soldering iron screen. Paste the downloaded firmware in the computer disk, and the "READY" in the soldering iron screen changes to "YES", the firmware is successfully upgraded, and the connection is disconnected. S99_V1.08_Firmware_release_update_description:... -
S60P Firmware Upgrade
Firmware update steps: The user holds down the "A" button and does not let go. After connecting the PC and soldering iron using USB, the "UPDATE" interface appears on the soldering iron screen. Paste the downloaded firmware in the computer disk, and the "READY" in the soldering iron screen changes to "YES", the firmware is successfully upgraded, and the connection is disconnected. ...
