When talking about screwdrivers, I believe everyone is no stranger. Enterprise, factory or as small as every family, at some point we all need a screwdriver to do things that only it can do, and that is to tighten the screws. According to each scene, due to the different specifications of the screws, the stripes are different, and the required screwdrivers are also different. In the past, workers who repaired homes often saw a tool kit with more or less screwdrivers of different specifications. , And there are also cross-shaped or straight. In this way, the tool kits brought by the repair workers are usually heavy.
In recent years, due to the development of the times, people have also demanded convenience and aesthetics for the basic element of tools. Therefore, sequre company produce the convenient toolboxes. The cutter head can be removed and replaced. As long as the staff carries a complete set of cutter heads, they can use a screwdriver to complete the tightening of many specifications of screws, and the design is more concise and easy to grasp, so that some people are happy to collect assembly tools.
But in the final analysis, this is also in the general assembly situation. The so-called general assembly situation is that the screw tightening completion is determined according to the judgment of people. In general operation, the tighter the screw is, the better. If the screw can not be screwed any more, the screw can be said to be qualified. However, at the industrial level, this demand is very irresponsible. In the manufacturing industry, the assembly of equipment or products should be carried out in accordance with certain requirements. These Regulations are often determined by the materials. If the force is always tightened in some occasions, it is easy to screw the material that is not too hard, and the product or equipment will have problems or even be scrapped. And even if there is no screw explosion, not in accordance with the requirements of the assembly, then the product quality problems are not to be underestimated.
Since the concept of industry 4.0 was published, everyone has been discussing intelligent manufacturing. Assembly, as the most basic part of manufacturing, naturally needs intelligence to cooperate. Locking screw, the most basic basic element, can be operated in almost all industrial occasions, and its repeatability and complexity are unique. Therefore, it is even more necessary for intelligence to simplify its complexity. Therefore, instead of manual tightening according to the characteristics of products and materials, intelligent screwdrivers are in line with the characteristics of the current manufacturing environment.
Intelligent electric screwdrivers have more than 90 tasks to store, which enables them to complete the tightening of many screws of different specifications. The fact that the torque and angle of the cutter head is monitored and digitized makes each screw properly tightened according to the requirements. Finally, the tightening data of each screw can be digitally transmitted to the computer to provide the first-hand screw tightening data for special analysts, While eliminating the tedious inspection task, it can also obtain valuable information such as the quality of raw materials according to the tightening data of different screws, which is the representative of intelligence.